Rexroth MG15G1X/V THROTTLE VALVE
Find the discount Rexroth MG15G1X/V THROTTLE VALVE online you need . We 0.67 X2 offer 17.7 DA_ ... 2000 Oil rpm If you check out our large selection of Rexroth MG15G1X/V THROTTLE VALVE once .
| Brand Name: | Rexroth |
| Model Number: | MG15G1X/V |
| Spline Description: | 76.0 LB |
| Max. RPM [Max: | Flange Mount |
| Mounting Flange: | Right Hand (CW) |
| Displacement Cover End (cu in/revolution): | 3525VQ25A21-11DD20 |
| Shaft End RPM [Max: | 3 |
| Shaft End Pressure [Max: | Flange |
| Shaft End Flow @ RPM: | N/A |
| Pressure Port Size, Cover End: | Standard Pilot |
Product Details
| Spline Description | 76.0 LB |
| Max. RPM [Max | Flange Mount |
| Mounting Flange | Right Hand (CW) |
| Displacement Cover End (cu in/revolution) | 3525VQ25A21-11DD20 |
| Shaft End RPM [Max | 3 |
| Shaft End Pressure [Max | Flange |
| Shaft End Flow @ RPM | N/A |
| Pressure Port Size, Cover End | Standard Pilot |
| Shaft Length | 1.25 in |
| Integral Valve Configuration | 14 Tooth Splined |
| Manufacturer Part No. | 3525VQ |
| Minor Diameter [Min | 1 15/16 in |
| Shaft Key | Buna-N |
| Shaft Dia. | 2500 |
| Major Diameter [Max | 1.04 in |
| Pilot Type | SAE C, 2 Bolt |
| Controlled Flow Rate | Single Shaft Seal |
| Seal Material | 12/24 |
| Pressure Port Size, Shaft End | 2500 |
| Pump Series | 2500 |
| Shaft Seal Type | N/A |
| Minor Diameter | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 1.248 in |
| Cover End Pressure [Max | 1.247 in |
| Mounting | N/A |
| Minor Diameter [Max | N/A |
| Cover End RPM [Max | N/A |
| Port Size | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Rotation | 3525VQ25A21-11DD20 |
| Relief Valve Setting | 3000 |
| Port Orientation - Cover End | 3000 |
| Weight | 31.5 |
| Major Diameter [Min | 37.5 |
| Cover End Flow @ RPM | w/o Integral Valves |
| Port Orientation - Shaft End | Outlet 135° CW from Inlet |
| Port Type | Outlet 90° CW from Inlet |
| Model No. | 1 in Flange |
| Shaft Type | 1 1/4 in Flange |
| GPM @ 1,800 rpm, Cover End | 4.12 |
| Displacement Shaft End (cu in/revolution) | 4.98 |
