NSK UCP 312 JAPAN Bearing 60*81.7*72
How do Setscrew Bearing Locking Device you find the 60*81.7*72 NSK UCP 312 JAPAN Bearing 60*81.7*72 FBV Hydraulic Pump Co., Ltd. specification? Manufacturers Online Free check！
| Brand Name: | NSK |
| Model Number: | UCP 312 |
| GPM @ 1,800 rpm, Shaft End: | 76.0 LB |
| Model No.: | Flange Mount |
| Pilot Type: | Left Hand (CCW) |
| Pressure Port Size, Cover End: | 3525VQ38A17-11AA20-LH |
| Minor Diameter [Max: | 3 |
| Spline Description: | Flange |
| Shaft End RPM [Max: | N/A |
| Shaft Key: | Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Shaft End | 76.0 LB |
| Model No. | Flange Mount |
| Pilot Type | Left Hand (CCW) |
| Pressure Port Size, Cover End | 3525VQ38A17-11AA20-LH |
| Minor Diameter [Max | 3 |
| Spline Description | Flange |
| Shaft End RPM [Max | N/A |
| Shaft Key | Standard Pilot |
| Port Type | 1.25 in |
| Cover End Flow @ RPM | 14 Tooth Splined |
| Shaft End Flow @ RPM | 3525VQ |
| Pump Series | 1 15/16 in |
| Cover End Pressure [Max | Buna-N |
| Relief Valve Setting | 2400 |
| Rotation | 1.04 in |
| Cover End RPM [Max | SAE C, 2 Bolt |
| Port Size | Single Shaft Seal |
| Shaft Type | 12/24 |
| Displacement Cover End (cu in/revolution) | 2500 |
| Seal Material | 2400 |
| Major Diameter [Min | N/A |
| Integral Valve Configuration | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 1.248 in |
| Minor Diameter | 1.247 in |
| Displacement Shaft End (cu in/revolution) | N/A |
| Pressure Port Size, Shaft End | N/A |
| Weight | N/A |
| Mounting | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Minor Diameter [Min | 3525VQ38A17-11AA20-LH |
| Controlled Flow Rate | 3000 |
| Mounting Flange | 3000 |
| Port Orientation - Cover End | 25.5 |
| Shaft End Pressure [Max | 57 |
| Shaft Seal Type | w/o Integral Valves |
| Max. RPM [Max | Outlet 135° CCW from Inlet |
| Major Diameter [Max | Outlet Opposite Inlet |
| GPM @ 1,800 rpm, Cover End | 1 in Flange |
| Manufacturer Part No. | 1 1/4 in Flange |
| Shaft Dia. | 3.37 |
| Shaft Length | 7.42 |