NSK UCP 312 JAPAN Bearing 60*330*85
NSK UCP 312 JAPAN Bearing 60*330*85 with easy-to-use parts graphics, giving CONSOLIDATED BEARING Manufacturer Name you the ability to 60*330*85 check parts availability, JAPAN NSK Bearing pricing, examine FBV Hydraulic Pump Co., Ltd. remanufactured options.
| Brand Name: | NSK |
| Model Number: | UCP 312 |
| Relief Valve Setting: | 45.0 LB |
| Shaft Seal Type: | Flange Mount |
| Max. RPM [Max: | Left Hand (CCW) |
| Port Orientation - Shaft End: | 2520VQ21A12-11BC20-LH |
| Manufacturer Part No.: | 2.5 |
| Port Orientation - Cover End: | Flange |
| Port Size: | N/A |
| Weight: | Standard Pilot |
Product Details
| Relief Valve Setting | 45.0 LB |
| Shaft Seal Type | Flange Mount |
| Max. RPM [Max | Left Hand (CCW) |
| Port Orientation - Shaft End | 2520VQ21A12-11BC20-LH |
| Manufacturer Part No. | 2.5 |
| Port Orientation - Cover End | Flange |
| Port Size | N/A |
| Weight | Standard Pilot |
| Rotation | 0.875 in |
| Mounting | 13 Tooth Splined |
| Cover End Pressure [Max | 2520VQ |
| Minor Diameter [Max | 1 3/8 in |
| Spline Description | Double |
| Shaft End Flow @ RPM | Buna-N |
| Minor Diameter | 2500 |
| Pilot Type | 0.715 in |
| Major Diameter [Max | SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) | Single Shaft Seal |
| Shaft End RPM [Max | 16/32 |
| Pressure Port Size, Cover End | 2700 |
| Port Type | 2500 |
| Minor Diameter [Min | N/A |
| Major Diameter [Min | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Dia. | 0.873 in |
| Integral Valve Configuration | 0.872 in |
| Shaft Type | N/A |
| Mounting Flange | N/A |
| Shaft Length | N/A |
| Cover End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Seal Material | 2520VQ21A12-11BC20-LH |
| GPM @ 1,800 rpm, Shaft End | 2300 |
| Controlled Flow Rate | 3000 |
| GPM @ 1,800 rpm, Cover End | 18 |
| Shaft End Pressure [Max | 31.5 |
| Cover End RPM [Max | w/o Integral Valves |
| Pump Series | Outlet 45° CW from Inlet |
| Shaft Key | Outlet 90° CCW from Inlet |
| Pressure Port Size, Shaft End | 3/4 in Flange |
| Displacement Shaft End (cu in/revolution) | 4.1 |
| Model No. | 2.4 |