Rexroth Z2FS16-8-3X/S2V THROTTLE VALVE
Manufacturers of Bearings with Housin Type all Rexroth THROTTLE VALVE are represented in our partial list of clients. Contact Gary Black Oxide Coating Holder Surface Treatment for a complete Rexroth Z2FS16-8-3X/S2V THROTTLE VALVE list of clients and projects.
| Brand Name: | Rexroth |
| Model Number: | Z2FS16-8-3X/S2V |
| Shaft Seal Type: | 45.0 LB |
| Seal Material: | Flange Mount |
| Major Diameter [Max: | Right Hand (CW) |
| Displacement Cover End (cu in/revolution): | 2520V17A5-11BB22R |
| GPM @ 1,800 rpm, Cover End: | 2 1/2 |
| Shaft End Flow @ RPM: | Flange |
| Weight: | N/A |
| Shaft Type: | Standard Pilot |
Product Details
| Shaft Seal Type | 45.0 LB |
| Seal Material | Flange Mount |
| Major Diameter [Max | Right Hand (CW) |
| Displacement Cover End (cu in/revolution) | 2520V17A5-11BB22R |
| GPM @ 1,800 rpm, Cover End | 2 1/2 |
| Shaft End Flow @ RPM | Flange |
| Weight | N/A |
| Shaft Type | Standard Pilot |
| Minor Diameter [Min | 1.09 in |
| Major Diameter [Min | 13 Tooth Splined |
| Port Orientation - Shaft End | 2520V |
| Port Type | 1.75 in |
| Port Orientation - Cover End | Buna-N |
| Mounting | 1800 |
| Minor Diameter [Max | 0.7285 in |
| Max. RPM [Max | SAE B, 2 Bolt |
| Model No. | Single Shaft Seal |
| Shaft End Pressure [Max | 16/32 |
| Minor Diameter | 1800 |
| Controlled Flow Rate | 1800 |
| Pressure Port Size, Shaft End | N/A |
| Pressure Port Size, Cover End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | 0.873 in |
| Integral Valve Configuration | 0.872 in |
| Cover End Flow @ RPM | 0.734 in |
| Shaft End RPM [Max | 0.723 in |
| Shaft Dia. | N/A |
| Shaft Length | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 2520V17A5-11BB22R |
| Pilot Type | 3000 |
| Spline Description | 2500 |
| Relief Valve Setting | 7.5 |
| Rotation | 25.5 |
| Port Size | N/A |
| Shaft Key | Outlet 45° CCW from Inlet |
| Cover End Pressure [Max | Outlet 90° CCW from Inlet |
| Manufacturer Part No. | 3/4 in Code 61 |
| Mounting Flange | 1 in Code 61 |
| Displacement Shaft End (cu in/revolution) | 1.1 |
| Pump Series | 3.4 |