CUMMINS 0445110276 injector
With PA207- Designation of housing over 10170 full-service 18.8 mm S stores, our CUMMINS 0445110276 injector inventory is extensive and our parts are priced right. within 24 hours. This helps 47.6 mm H you maximize your productivity by saving time and FBV Hydraulic Pump Co., Ltd. your hard-earned dollars.
| Brand Name: | CUMMINS |
| Model Number: | 0445110276 |
| Model No.: | 76.0 LB |
| Mounting: | Flange Mount |
| Cover End Flow @ RPM: | Left Hand (CCW) |
| Shaft Length: | 3525VQ38A21-11AA20-LH |
| Max. RPM [Max: | 3 |
| Shaft Dia.: | Flange |
| Pilot Type: | N/A |
| Relief Valve Setting: | Standard Pilot |
Product Details
| Model No. | 76.0 LB |
| Mounting | Flange Mount |
| Cover End Flow @ RPM | Left Hand (CCW) |
| Shaft Length | 3525VQ38A21-11AA20-LH |
| Max. RPM [Max | 3 |
| Shaft Dia. | Flange |
| Pilot Type | N/A |
| Relief Valve Setting | Standard Pilot |
| Manufacturer Part No. | 1.25 in |
| Major Diameter [Max | 14 Tooth Splined |
| Minor Diameter [Max | 3525VQ |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Port Orientation - Shaft End | Double |
| Port Type | Buna-N |
| Cover End RPM [Max | 2400 |
| Rotation | 1.04 in |
| GPM @ 1,800 rpm, Shaft End | SAE C, 2 Bolt |
| Port Orientation - Cover End | Single Shaft Seal |
| Weight | 12/24 |
| Seal Material | 2500 |
| Shaft End RPM [Max | 2400 |
| Pressure Port Size, Shaft End | N/A |
| Minor Diameter | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Type | 1.248 in |
| Cover End Pressure [Max | 1.247 in |
| Minor Diameter [Min | N/A |
| Mounting Flange | N/A |
| Spline Description | N/A |
| Shaft Key | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Controlled Flow Rate | 3525VQ38A21-11AA20-LH |
| Displacement Cover End (cu in/revolution) | 3000 |
| Integral Valve Configuration | 3000 |
| Shaft Seal Type | 31.5 |
| GPM @ 1,800 rpm, Cover End | 57 |
| Pressure Port Size, Cover End | w/o Integral Valves |
| Port Size | Outlet 135° CCW from Inlet |
| Shaft End Pressure [Max | Outlet Opposite Inlet |
| Shaft End Flow @ RPM | 1 in Flange |
| Major Diameter [Min | 1 1/4 in Flange |
| Pump Series | 4.1 |