NSK UCF 208 JAPAN Bearing
With over 10170 full-service stores, our NSK UCF 208 JAPAN Bearing No Snap Ring inventory is extensive 1.266 Inch | 32.156 D and our parts are priced right. within 24 hours. This FBV Hydraulic Pump Co., Ltd. helps you maximize 0.591 Inch | 15.011 Outer Race Width your productivity by saving time and your hard-earned dollars.
| Brand Name: | NSK |
| Model Number: | UCF 208 |
| Displacement Cover End (cu in/revolution): | 101.0 LB |
| Model No.: | Flange Mount |
| Port Orientation - Shaft End: | Right Hand (CW) |
| Shaft End Flow @ RPM: | 4525VQ42A14-1BB20 |
| Shaft Seal Type: | 3 1/2 |
| Rotation: | Flange |
| Shaft Type: | 5/16 in |
| Seal Material: | Standard Pilot |
Product Details
| Displacement Cover End (cu in/revolution) | 101.0 LB |
| Model No. | Flange Mount |
| Port Orientation - Shaft End | Right Hand (CW) |
| Shaft End Flow @ RPM | 4525VQ42A14-1BB20 |
| Shaft Seal Type | 3 1/2 |
| Rotation | Flange |
| Shaft Type | 5/16 in |
| Seal Material | Standard Pilot |
| Displacement Shaft End (cu in/revolution) | 1.25 in |
| Shaft Length | Straight w/ Key |
| Mounting | 4525VQ |
| Minor Diameter [Max | 1.9375 in |
| Mounting Flange | Buna-N |
| Shaft Dia. | 2200 |
| Shaft End Pressure [Max | N/A |
| Cover End Pressure [Max | SAE C, 2 Bolt |
| Shaft Key | Single Shaft Seal |
| Pump Series | N/A |
| Spline Description | 2200 |
| Cover End Flow @ RPM | 2200 |
| Major Diameter [Min | N/A |
| Shaft End RPM [Max | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Port Orientation - Cover End | N/A |
| Minor Diameter [Min | N/A |
| Major Diameter [Max | N/A |
| Cover End RPM [Max | N/A |
| Port Size | N/A |
| GPM @ 1,800 rpm, Cover End | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Controlled Flow Rate | 4525VQ42A14-1BB20 |
| Port Type | 3000 |
| Pilot Type | 2500 |
| Relief Valve Setting | 21 |
| Weight | 63 |
| Manufacturer Part No. | w/o Integral Valves |
| Integral Valve Configuration | Outlet 45° CCW from Inlet |
| Max. RPM [Max | Outlet 90° CCW from Inlet |
| Pressure Port Size, Shaft End | 1 in Flange |
| Pressure Port Size, Cover End | 1 1/2 in Flange |
| GPM @ 1,800 rpm, Shaft End | 2.77 |
| Minor Diameter | 8.46 |