Rexroth SV20GB1-4X/ check valve
Our highly-skilled and factory-trained service experts have the resources to help you with all your Rexroth SV20GB1-4X/ check valve needs H series: - including 46 mm overall length: routine maintenance, major repairs, warranty service, and Rexroth check valve Click here manufacturer product page: equipment inspections.
| Brand Name: | Rexroth |
| Model Number: | SV20GB1-4X/ |
| Minor Diameter [Min: | 45.0 LB |
| Relief Valve Setting: | Flange Mount |
| Shaft End Flow @ RPM: | Left Hand (CCW) |
| Cover End RPM [Max: | 2520VQ12A5-11CC20LH |
| Shaft Type: | 2.5 |
| Cover End Flow @ RPM: | Flange |
| Port Size: | N/A |
| Pressure Port Size, Shaft End: | Standard Pilot |
Product Details
| Minor Diameter [Min | 45.0 LB |
| Relief Valve Setting | Flange Mount |
| Shaft End Flow @ RPM | Left Hand (CCW) |
| Cover End RPM [Max | 2520VQ12A5-11CC20LH |
| Shaft Type | 2.5 |
| Cover End Flow @ RPM | Flange |
| Port Size | N/A |
| Pressure Port Size, Shaft End | Standard Pilot |
| Port Orientation - Cover End | 0.875 in |
| Model No. | 13 Tooth Splined |
| Port Type | 2520VQ |
| Pilot Type | 1 3/8 in |
| Cover End Pressure [Max | Double |
| Max. RPM [Max | Buna-N |
| Major Diameter [Min | 2700 |
| Shaft Key | 0.715 in |
| Displacement Cover End (cu in/revolution) | SAE B, 2 Bolt |
| Shaft Dia. | Single Shaft Seal |
| Spline Description | 16/32 |
| Manufacturer Part No. | 2700 |
| GPM @ 1,800 rpm, Shaft End | 2700 |
| Integral Valve Configuration | N/A |
| Shaft Seal Type | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Weight | 0.873 in |
| Pressure Port Size, Cover End | 0.872 in |
| Controlled Flow Rate | N/A |
| Minor Diameter | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Seal Material | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft End RPM [Max | 2520VQ12A5-11CC20LH |
| Shaft Length | 3000 |
| Minor Diameter [Max | 3000 |
| Mounting | 7.5 |
| Major Diameter [Max | 18 |
| Pump Series | w/o Integral Valves |
| Rotation | Outlet 45° CW from Inlet |
| Mounting Flange | Outlet Inline w/Inlet |
| Port Orientation - Shaft End | 3/4 in Flange |
| Shaft End Pressure [Max | 1 in Flange |
| Displacement Shaft End (cu in/revolution) | 2.5 |