BOSCH 0445110305 injector
The online BOSCH 0445110305 injector parts 0.092 Inch | 2.337 M Height store gives you immediate access to a selection of FBV Hydraulic Pump Co., Ltd. 8482.99.25.40 Harmonized Tariff Code more than Yes Thrust Bearing 1.4 million new, used, remanufactured.
| Brand Name: | BOSCH |
| Model Number: | 0445110305 |
| Displacement Shaft End (cu in/revolution): | 30.0 LB |
| Weight: | Flange Mount |
| Integral Valve Configuration: | Right Hand (CW) |
| Minor Diameter: | V2010-1F13S4S-11AD12 |
| Controlled Flow Rate: | 1 1/2 |
| Major Diameter [Min: | Flange |
| Shaft End Pressure [Max: | N/A |
| Cover End Flow @ RPM: | N/A |
Product Details
| Displacement Shaft End (cu in/revolution) | 30.0 LB |
| Weight | Flange Mount |
| Integral Valve Configuration | Right Hand (CW) |
| Minor Diameter | V2010-1F13S4S-11AD12 |
| Controlled Flow Rate | 1 1/2 |
| Major Diameter [Min | Flange |
| Shaft End Pressure [Max | N/A |
| Cover End Flow @ RPM | N/A |
| Max. RPM [Max | 0.875 in |
| Mounting | 13 Tooth Splined |
| Relief Valve Setting | V2010 |
| Shaft End RPM [Max | 1.3125 in |
| Port Type | Buna-N |
| Displacement Cover End (cu in/revolution) | 2400 |
| Manufacturer Part No. | 0.728 in |
| Spline Description | SAE B, 2 Bolt |
| Shaft Key | Single Shaft Seal |
| Seal Material | 16/32 |
| Shaft End Flow @ RPM | 3000 |
| Rotation | 2400 |
| Mounting Flange | N/A |
| GPM @ 1,800 rpm, Cover End | 4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End | 0.873 in |
| Shaft Type | 0.872 in |
| Shaft Dia. | 0.7335 in |
| Model No. | 0.7225 in |
| Cover End RPM [Max | N/A |
| Minor Diameter [Max | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Shaft Length | V2010-1F13S4S-11AD12 |
| Pressure Port Size, Shaft End | 2500 |
| Minor Diameter [Min | 2200 |
| Port Orientation - Cover End | 6 |
| Shaft Seal Type | 19.5 |
| Port Size | N/A |
| Cover End Pressure [Max | Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet Opposite Inlet |
| Pilot Type | 1/2 in SAE O-Ring |
| Port Orientation - Shaft End | 3/4 in SAE O-Ring |
| Pump Series | 0.8 |
| Major Diameter [Max | 2.59 |