BOSCH 0445110164 injector
With over 10170 full-service stores, our BOSCH 0445110164 injector inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize 12.6 Inch | 320.04Mi Bolt Spacing Maximum your productivity by saving FBV Hydraulic Pump Co., Ltd. time and your hard-earned dollars.
| Brand Name: | BOSCH |
| Model Number: | 0445110164 |
| Shaft Type: | 45.0 LB |
| Mounting Flange: | Flange Mount |
| Major Diameter [Min: | Left Hand (CCW) |
| Minor Diameter: | 2520VQ21A11-11BB20-LH |
| Rotation: | 2 1/2 |
| Manufacturer Part No.: | Flange |
| Minor Diameter [Min: | N/A |
| Major Diameter [Max: | Standard Pilot |
Product Details
| Shaft Type | 45.0 LB |
| Mounting Flange | Flange Mount |
| Major Diameter [Min | Left Hand (CCW) |
| Minor Diameter | 2520VQ21A11-11BB20-LH |
| Rotation | 2 1/2 |
| Manufacturer Part No. | Flange |
| Minor Diameter [Min | N/A |
| Major Diameter [Max | Standard Pilot |
| Seal Material | 0.875 in |
| Port Size | 13 Tooth Splined |
| Pressure Port Size, Shaft End | 2520VQ |
| Displacement Cover End (cu in/revolution) | 1.375 in |
| Port Orientation - Cover End | Buna-N |
| Port Orientation - Shaft End | 2500 |
| Relief Valve Setting | 0.715 in |
| Pressure Port Size, Cover End | SAE B, 2 Bolt |
| Shaft Seal Type | Single Shaft Seal |
| Weight | 16/32 |
| Shaft Dia. | 2700 |
| Displacement Shaft End (cu in/revolution) | 2500 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | 0.873 in |
| Minor Diameter [Max | 0.872 in |
| Integral Valve Configuration | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Pump Series | N/A |
| GPM @ 1,800 rpm, Shaft End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pilot Type | 2520VQ21A11-11BB20-LH |
| Shaft End RPM [Max | 3000 |
| Spline Description | 3000 |
| Shaft End Pressure [Max | 16.5 |
| Shaft Key | 31.5 |
| Max. RPM [Max | w/o Integral Valves |
| Model No. | Outlet 45° CCW from Inlet |
| Shaft End Flow @ RPM | Outlet 90° CCW from Inlet |
| Cover End Pressure [Max | 3/4 in Flange |
| Port Type | 1 in Flange |
| Shaft Length | 2.22 |
| Mounting | 4.12 |