NSK W687ZZA JAPAN Bearing 7*14*3.5
With over 10170 full-service stores, our 55.39 Weight NSK W687ZZA JAPAN Bearing 7*14*3.5 inventory is extensive 7*14*3.5 and our parts are priced right. within 24 hours. This helps you FBV Hydraulic Pump Co., Ltd. maximize your productivity by saving Cast Iron Housing Material time and your hard-earned dollars.
| Brand Name: | NSK |
| Model Number: | W687ZZA |
| Port Type: | 101.0 LB |
| GPM @ 1,800 rpm, Cover End: | Flange Mount |
| Minor Diameter [Min: | Left Hand (CCW) |
| Model No.: | 4525VQ42A21-11AA20-LH |
| Major Diameter [Max: | 3 1/2 |
| Major Diameter [Min: | Flange |
| Controlled Flow Rate: | N/A |
| Displacement Shaft End (cu in/revolution): | Standard Pilot |
Product Details
| Port Type | 101.0 LB |
| GPM @ 1,800 rpm, Cover End | Flange Mount |
| Minor Diameter [Min | Left Hand (CCW) |
| Model No. | 4525VQ42A21-11AA20-LH |
| Major Diameter [Max | 3 1/2 |
| Major Diameter [Min | Flange |
| Controlled Flow Rate | N/A |
| Displacement Shaft End (cu in/revolution) | Standard Pilot |
| Weight | 1.25 in |
| Spline Description | 14 Tooth Splined |
| Seal Material | 4525VQ |
| Displacement Cover End (cu in/revolution) | 1.9375 in |
| Pressure Port Size, Cover End | Buna-N |
| Minor Diameter | 2200 |
| Shaft Dia. | 1.04 in |
| Pump Series | SAE C, 2 Bolt |
| Max. RPM [Max | Single Shaft Seal |
| Shaft End RPM [Max | 12/24 |
| Relief Valve Setting | 2200 |
| Port Orientation - Cover End | 2200 |
| Cover End Pressure [Max | N/A |
| GPM @ 1,800 rpm, Shaft End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 1.248 in |
| Rotation | 1.247 in |
| Pilot Type | N/A |
| Shaft Seal Type | N/A |
| Shaft Length | N/A |
| Mounting | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
| Shaft End Pressure [Max | 4525VQ42A21-11AA20-LH |
| Integral Valve Configuration | 3000 |
| Shaft Key | 2500 |
| Mounting Flange | 31.5 |
| Cover End Flow @ RPM | 63 |
| Port Size | w/o Integral Valves |
| Manufacturer Part No. | Outlet 135° CCW from Inlet |
| Minor Diameter [Max | Outlet Opposite Inlet |
| Pressure Port Size, Shaft End | 1 in Flange |
| Shaft Type | 1 1/2 in Flange |
| Cover End RPM [Max | 4.12 |
| Shaft End Flow @ RPM | 8.46 |