Danfoss Shut-off valves 148B4622 STC 15 A STR SHUT-OFF VALVE CAP
What are the 12000 Grease Limiting Speed (r/min): types of Danfoss Shut-off valves 148B4622 STC 15 A STR SHUT-OFF VALVE CAP Open Type Seals or Shields: ? Plastic Cage Type: Danfoss Shut-off valves Manufacturing Service . Get Your Free, Instant price, design review.
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4622 STC 15 A |
| Port Orientation - Cover End: |
45.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| Major Diameter [Min: |
Right Hand (CW) |
| Mounting: |
2520VQ12A5-11DD20 |
| Cover End RPM [Max: |
2 1/2 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Pressure Port Size, Cover End: |
N/A |
| Rotation: |
Standard Pilot |
Product Details
| Port Orientation - Cover End |
45.0 LB |
| Integral Valve Configuration |
Flange Mount |
| Major Diameter [Min |
Right Hand (CW) |
| Mounting |
2520VQ12A5-11DD20 |
| Cover End RPM [Max |
2 1/2 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Pressure Port Size, Cover End |
N/A |
| Rotation |
Standard Pilot |
| Minor Diameter [Min |
0.875 in |
| Weight |
13 Tooth Splined |
| Port Size |
2520VQ |
| Pressure Port Size, Shaft End |
1 3/8 in |
| Shaft Dia. |
Buna-N |
| Shaft Seal Type |
2700 |
| Cover End Pressure [Max |
0.715 in |
| Controlled Flow Rate |
SAE B, 2 Bolt |
| Mounting Flange |
Single Shaft Seal |
| Pump Series |
16/32 |
| Shaft Type |
2700 |
| Relief Valve Setting |
2700 |
| Minor Diameter |
N/A |
| Shaft Length |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
0.873 in |
| GPM @ 1,800 rpm, Shaft End |
0.872 in |
| Cover End Flow @ RPM |
N/A |
| Port Type |
N/A |
| Port Orientation - Shaft End |
N/A |
| Seal Material |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Max. RPM [Max |
2520VQ12A5-11DD20 |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Major Diameter [Max |
3000 |
| Spline Description |
7.5 |
| Model No. |
18 |
| Shaft Key |
w/o Integral Valves |
| Minor Diameter [Max |
Outlet 135° CW from Inlet |
| Shaft End Flow @ RPM |
Outlet 90° CW from Inlet |
| Shaft End Pressure [Max |
3/4 in Flange |
| Manufacturer Part No. |
1 in Flange |
| Pilot Type |
1.1 |
| Shaft End RPM [Max |
2.45 |