Rexroth SL10PA1-4X/ check valve
Rexroth SL10PA1-4X/ check valve SEARCH - Whether it's agriculture 1107KR replacement bearing: or construction equipment your working on, Has 3400 lb radial dynamic load capacity: theRexroth check valve you need.
| Brand Name: | Rexroth |
| Model Number: | SL10PA1-4X/ |
| Port Orientation - Cover End: | 45.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Shaft Key: | Right Hand (CW) |
| Shaft Length: | 2520VQ12A12-11CB20 |
| Displacement Shaft End (cu in/revolution): | 2 1/2 |
| Integral Valve Configuration: | Flange |
| Pump Series: | N/A |
| Cover End Pressure [Max: | Standard Pilot |
Product Details
| Port Orientation - Cover End | 45.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Shaft Key | Right Hand (CW) |
| Shaft Length | 2520VQ12A12-11CB20 |
| Displacement Shaft End (cu in/revolution) | 2 1/2 |
| Integral Valve Configuration | Flange |
| Pump Series | N/A |
| Cover End Pressure [Max | Standard Pilot |
| Pressure Port Size, Cover End | 0.875 in |
| Shaft Seal Type | 13 Tooth Splined |
| Max. RPM [Max | 2520VQ |
| Shaft Dia. | 1 3/8 in |
| Mounting | Buna-N |
| Pilot Type | 2700 |
| Cover End RPM [Max | 0.715 in |
| Major Diameter [Min | SAE B, 2 Bolt |
| Shaft End Flow @ RPM | Single Shaft Seal |
| Minor Diameter [Max | 16/32 |
| Minor Diameter | 2700 |
| Manufacturer Part No. | 2700 |
| Pressure Port Size, Shaft End | N/A |
| Shaft Type | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Port Type | 0.873 in |
| Seal Material | 0.872 in |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Relief Valve Setting | N/A |
| Port Size | N/A |
| Controlled Flow Rate | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Spline Description | 2520VQ12A12-11CB20 |
| Rotation | 2300 |
| Model No. | 3000 |
| Port Orientation - Shaft End | 18 |
| Weight | 18 |
| Minor Diameter [Min | w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End | Outlet 45° CCW from Inlet |
| Displacement Cover End (cu in/revolution) | Outlet Inline w/Inlet |
| Cover End Flow @ RPM | 3/4 in Flange |
| Mounting Flange | 1 in Flange |
| Shaft End Pressure [Max | 2.41 |
| Major Diameter [Max | 2.45 |