NSK UCP 209 45MM 2 HOLE JAPAN Bearing
NSK UCP 209 45MM 2 HOLE JAPAN Bearing Product Brochures , JAPAN NSK Bearing Manufacturing Service . FBV Hydraulic Pump Co., Ltd. REGAL BELOIT Manufacturer Name Get Your Free.
| Brand Name: | NSK |
| Model Number: | UCP 209 45MM 2 HOLE |
| Minor Diameter [Min: | 101.0 LB |
| Shaft Dia.: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Left Hand (CCW) |
| Major Diameter [Max: | 4525V60E17-86CC22L |
| Port Orientation - Shaft End: | 3.5 |
| Seal Material: | Flange |
| Minor Diameter [Max: | 3/8 in |
| Cover End Pressure [Max: | Standard Pilot |
Product Details
| Minor Diameter [Min | 101.0 LB |
| Shaft Dia. | Flange Mount |
| Displacement Cover End (cu in/revolution) | Left Hand (CCW) |
| Major Diameter [Max | 4525V60E17-86CC22L |
| Port Orientation - Shaft End | 3.5 |
| Seal Material | Flange |
| Minor Diameter [Max | 3/8 in |
| Cover End Pressure [Max | Standard Pilot |
| Major Diameter [Min | 1.5 in |
| Port Orientation - Cover End | Straight w/ Key |
| Relief Valve Setting | 4525V |
| Shaft End Pressure [Max | 3 7/16 in |
| Mounting | Double |
| Pressure Port Size, Cover End | Buna-N |
| Max. RPM [Max | 1800 |
| Controlled Flow Rate | N/A |
| Shaft Key | SAE C, 2 Bolt |
| Cover End Flow @ RPM | Single Shaft Seal |
| Mounting Flange | N/A |
| GPM @ 1,800 rpm, Cover End | 1800 |
| Shaft Seal Type | 1800 |
| Model No. | N/A |
| Shaft Type | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | N/A |
| Port Type | N/A |
| Rotation | N/A |
| Shaft End Flow @ RPM | N/A |
| Pump Series | N/A |
| Spline Description | 60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Minor Diameter | 4525V60E17-86CC22L |
| Shaft Length | 2500 |
| Weight | 2500 |
| Integral Valve Configuration | 25.5 |
| Port Size | 90 |
| Pilot Type | N/A |
| GPM @ 1,800 rpm, Shaft End | Outlet 45° CW from Inlet |
| Shaft End RPM [Max | Outlet Inline w/Inlet |
| Manufacturer Part No. | 1 in Code 61 |
| Displacement Shaft End (cu in/revolution) | 11.8 |
| Pressure Port Size, Shaft End | 3.4 |