NSK UCFB207 023 1 7/16 JAPAN Bearing 35*40*42.9
With over 10170 full-service stores, our NSK UCFB207 023 1 7/16 JAPAN Bearing 35*40*42.9 inventory is extensive and Bearings Category our parts are priced right. within 24 hours. This N/A Minimum Buy Quantity helps FBV Hydraulic Pump Co., Ltd. 35*40*42.9 you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | NSK |
| Model Number: | UCFB207 023 1 7/16 |
| Shaft Key: | 35.0 LB |
| Shaft Type: | Flange Mount |
| Port Orientation - Cover End: | Left Hand (CCW) |
| Cover End Pressure [Max: | V2020-1F6S6S-11DD30L |
| Max. RPM [Max: | 2 |
| Integral Valve Configuration: | Flange |
| Controlled Flow Rate: | N/A |
| Shaft End Flow @ RPM: | N/A |
Product Details
| Shaft Key | 35.0 LB |
| Shaft Type | Flange Mount |
| Port Orientation - Cover End | Left Hand (CCW) |
| Cover End Pressure [Max | V2020-1F6S6S-11DD30L |
| Max. RPM [Max | 2 |
| Integral Valve Configuration | Flange |
| Controlled Flow Rate | N/A |
| Shaft End Flow @ RPM | N/A |
| Pressure Port Size, Cover End | 0.875 in |
| Pump Series | 13 Tooth Splined |
| Displacement Cover End (cu in/revolution) | V2020 |
| Spline Description | 1.3125 in |
| Relief Valve Setting | Double |
| Weight | Buna-N |
| Port Size | 3000 |
| Minor Diameter [Max | 0.728 in |
| Model No. | SAE B, 2 Bolt |
| Mounting | Single Shaft Seal |
| Cover End RPM [Max | 16/32 |
| Pressure Port Size, Shaft End | 3000 |
| Minor Diameter | 3000 |
| Seal Material | N/A |
| Rotation | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Shaft Dia. | 0.873 in |
| Pilot Type | 0.872 in |
| GPM @ 1,800 rpm, Shaft End | 0.734 in |
| GPM @ 1,800 rpm, Cover End | 0.723 in |
| Major Diameter [Max | N/A |
| Shaft Seal Type | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Cover End Flow @ RPM | V2020-1F6S6S-11DD30L |
| Manufacturer Part No. | 2500 |
| Major Diameter [Min | 2500 |
| Minor Diameter [Min | 9 |
| Mounting Flange | 9 |
| Shaft End Pressure [Max | N/A |
| Shaft Length | Outlet 90° CW from Inlet |
| Port Orientation - Shaft End | Outlet 90° CW from Inlet |
| Displacement Shaft End (cu in/revolution) | 1.2 |
| Shaft End RPM [Max | 3/4 in SAE O-Ring |
| Port Type | 1.2 |