NSK UCP210 D1 JAPAN Bearing
The online NSK UCP210 D1 JAPAN Bearing parts store gives you 27.928 Weight / LBS immediate access to a selection 2.438 Inch | 61.925 d of FBV Hydraulic Pump Co., Ltd. more than M06288 Product Group 1.4 million new, used, remanufactured.
| Brand Name: | NSK |
| Model Number: | UCP210 D1 |
| Model No.: | 101.0 LB |
| Major Diameter [Min: | Flange Mount |
| Integral Valve Configuration: | Right Hand (CW) |
| Displacement Cover End (cu in/revolution): | 4525VQ50A12-1AA20 |
| Shaft Seal Type: | 3 1/2 |
| Port Size: | Flange |
| Seal Material: | 5/16 in |
| Minor Diameter [Max: | Standard Pilot |
Product Details
| Model No. | 101.0 LB |
| Major Diameter [Min | Flange Mount |
| Integral Valve Configuration | Right Hand (CW) |
| Displacement Cover End (cu in/revolution) | 4525VQ50A12-1AA20 |
| Shaft Seal Type | 3 1/2 |
| Port Size | Flange |
| Seal Material | 5/16 in |
| Minor Diameter [Max | Standard Pilot |
| Pilot Type | 1.25 in |
| Shaft Length | Straight w/ Key |
| Relief Valve Setting | 4525VQ |
| Spline Description | 1.9375 in |
| Controlled Flow Rate | Buna-N |
| Shaft End Pressure [Max | 2200 |
| Pressure Port Size, Cover End | N/A |
| Shaft End Flow @ RPM | SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End | Single Shaft Seal |
| Major Diameter [Max | N/A |
| Shaft Type | 2200 |
| Port Orientation - Cover End | 2200 |
| Minor Diameter [Min | N/A |
| Pressure Port Size, Shaft End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Rotation | N/A |
| Port Orientation - Shaft End | N/A |
| Cover End RPM [Max | N/A |
| Weight | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Shaft Dia. | 50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Cover End Flow @ RPM | 4525VQ50A12-1AA20 |
| Port Type | 3000 |
| Max. RPM [Max | 2500 |
| Displacement Shaft End (cu in/revolution) | 18 |
| Shaft Key | 75 |
| Pump Series | w/o Integral Valves |
| Shaft End RPM [Max | Outlet 135° CCW from Inlet |
| Cover End Pressure [Max | Outlet Opposite Inlet |
| Mounting Flange | 1 in Flange |
| Mounting | 1 1/2 in Flange |
| Manufacturer Part No. | 2.45 |
| Minor Diameter | 9.9 |