BOSCH 0445110047 injector
Online shopping BOSCH 0445110047 injector from a FBV Hydraulic Pump Co., Ltd. great selection at Pillow Block Category Store. ... BOSCH injector 1 Piece Solid Housing Configuration Accessories. 2 Bolt Pillow Block; Long Description
| Brand Name: | BOSCH |
| Model Number: | 0445110047 |
| Seal Material: | 45.0 LB |
| Weight: | Flange Mount |
| Integral Valve Configuration: | Left Hand (CCW) |
| Port Orientation - Cover End: | 2520VQ17A11-11AA20-LH |
| Shaft Length: | 2 1/2 |
| Minor Diameter [Max: | Flange |
| Mounting: | N/A |
| Relief Valve Setting: | Standard Pilot |
Product Details
| Seal Material | 45.0 LB |
| Weight | Flange Mount |
| Integral Valve Configuration | Left Hand (CCW) |
| Port Orientation - Cover End | 2520VQ17A11-11AA20-LH |
| Shaft Length | 2 1/2 |
| Minor Diameter [Max | Flange |
| Mounting | N/A |
| Relief Valve Setting | Standard Pilot |
| Displacement Shaft End (cu in/revolution) | 0.875 in |
| Port Size | 13 Tooth Splined |
| GPM @ 1,800 rpm, Shaft End | 2520VQ |
| Shaft Type | 1 3/8 in |
| Pilot Type | Buna-N |
| Shaft Dia. | 2500 |
| Controlled Flow Rate | 0.715 in |
| Shaft End Flow @ RPM | SAE B, 2 Bolt |
| Max. RPM [Max | Single Shaft Seal |
| Shaft Seal Type | 16/32 |
| Pressure Port Size, Cover End | 2700 |
| Displacement Cover End (cu in/revolution) | 2500 |
| Port Type | N/A |
| Spline Description | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max | 0.873 in |
| Minor Diameter [Min | 0.872 in |
| Shaft Key | N/A |
| Manufacturer Part No. | N/A |
| GPM @ 1,800 rpm, Cover End | N/A |
| Pump Series | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Major Diameter [Min | 2520VQ17A11-11AA20-LH |
| Mounting Flange | 3000 |
| Model No. | 3000 |
| Rotation | 16.5 |
| Major Diameter [Max | 25.5 |
| Cover End RPM [Max | w/o Integral Valves |
| Port Orientation - Shaft End | Outlet 135° CCW from Inlet |
| Cover End Pressure [Max | Outlet Opposite Inlet |
| Pressure Port Size, Shaft End | 3/4 in Flange |
| Cover End Flow @ RPM | 1 in Flange |
| Minor Diameter | 2.22 |
| Shaft End Pressure [Max | 3.37 |