COMMON RAIL 0445110059 injector
Find the FBV Hydraulic Pump Co., Ltd. discount COMMON RAIL 0445110059 injector online you need . 1300 rpm Grease Speed Rating n1 We offer ... If you 40 º Angle Third check 475000 N Basic Dynamic Radial Load Rating 15 B Bearing C2 out our large selection of COMMON RAIL 0445110059 injector once .
What is 0445110059 bearing cross reference？
| Brand Name: |
COMMON RAIL |
| Model Number: |
0445110059 |
| Port Type: |
35.0 LB |
| Pump Series: |
Flange Mount |
| Shaft End Pressure [Max: |
Right Hand (CW) |
| Pressure Port Size, Cover End: |
V2020-1F9S9S-1CC30 |
| Shaft Length: |
2 |
| Cover End RPM [Max: |
Flange |
| Port Orientation - Cover End: |
3/16 in |
| Weight: |
N/A |
Product Details
| Port Type |
35.0 LB |
| Pump Series |
Flange Mount |
| Shaft End Pressure [Max |
Right Hand (CW) |
| Pressure Port Size, Cover End |
V2020-1F9S9S-1CC30 |
| Shaft Length |
2 |
| Cover End RPM [Max |
Flange |
| Port Orientation - Cover End |
3/16 in |
| Weight |
N/A |
| Spline Description |
0.875 in |
| Mounting |
Straight w/ Key |
| GPM @ 1,800 rpm, Shaft End |
V2020 |
| Cover End Flow @ RPM |
2.3125 in |
| Minor Diameter [Min |
Double |
| Rotation |
Buna-N |
| Minor Diameter [Max |
2800 |
| Relief Valve Setting |
N/A |
| Shaft Key |
SAE B, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Seal Material |
N/A |
| Port Orientation - Shaft End |
2800 |
| Mounting Flange |
2800 |
| Model No. |
N/A |
| Shaft End RPM [Max |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Controlled Flow Rate |
N/A |
| Cover End Pressure [Max |
N/A |
| Max. RPM [Max |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Major Diameter [Max |
N/A |
| Displacement Cover End (cu in/revolution) |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| Minor Diameter |
V2020-1F9S9S-1CC30 |
| Pressure Port Size, Shaft End |
2500 |
| Displacement Shaft End (cu in/revolution) |
1.8 |
| Integral Valve Configuration |
13.5 |
| Pilot Type |
13.5 |
| Port Size |
N/A |
| Shaft Type |
Outlet Inline w/Inlet |
| Manufacturer Part No. |
Outlet Inline w/Inlet |
| Shaft End Flow @ RPM |
3/4 in SAE O-Ring |
| Shaft Seal Type |
3/4 in SAE O-Ring |
| Shaft Dia. |
1.8 |