NSK UCP212 D1 JAPAN Bearing
What are FBV Hydraulic Pump Co., Ltd. the types of NSK UCP212 D1 JAPAN Bearing ? JAPAN NSK Bearing Pillow Block Category Manufacturing Service . Get Your Free, Instant price, design 4 Bolt Pillow Block; Long Description Bearing Noun review.
| Brand Name: | NSK |
| Model Number: | UCP212 D1 |
| Port Orientation - Cover End: | 30.0 LB |
| Pressure Port Size, Cover End: | Flange Mount |
| Max. RPM [Max: | Right Hand (CW) |
| Cover End RPM [Max: | V2010-2F7S2S-1BB12 |
| GPM @ 1,800 rpm, Shaft End: | 1.5 |
| Manufacturer Part No.: | Flange |
| Shaft Type: | 3/16 in |
| Pressure Port Size, Shaft End: | N/A |
Product Details
| Port Orientation - Cover End | 30.0 LB |
| Pressure Port Size, Cover End | Flange Mount |
| Max. RPM [Max | Right Hand (CW) |
| Cover End RPM [Max | V2010-2F7S2S-1BB12 |
| GPM @ 1,800 rpm, Shaft End | 1.5 |
| Manufacturer Part No. | Flange |
| Shaft Type | 3/16 in |
| Pressure Port Size, Shaft End | N/A |
| Seal Material | 0.875 in |
| Shaft Dia. | Straight w/ Key |
| Major Diameter [Min | V2010 |
| Mounting Flange | 2.3125 in |
| Port Orientation - Shaft End | Double |
| Shaft Length | Buna-N |
| Shaft End RPM [Max | 3000 |
| Minor Diameter | N/A |
| Mounting | SAE B, 2 Bolt |
| Pump Series | Single Shaft Seal |
| Integral Valve Configuration | N/A |
| Rotation | 3000 |
| Shaft End Flow @ RPM | 3000 |
| Controlled Flow Rate | N/A |
| Cover End Flow @ RPM | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Cover End Pressure [Max | N/A |
| Port Type | N/A |
| Spline Description | N/A |
| Weight | N/A |
| Model No. | N/A |
| Shaft End Pressure [Max | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Major Diameter [Max | V2010-2F7S2S-1BB12 |
| Port Size | 2500 |
| Minor Diameter [Min | 2500 |
| Shaft Seal Type | 3 |
| Minor Diameter [Max | 10.5 |
| Pilot Type | N/A |
| Shaft Key | Outlet 45° CCW from Inlet |
| GPM @ 1,800 rpm, Cover End | Outlet 90° CCW from Inlet |
| Displacement Cover End (cu in/revolution) | 1/2 in SAE O-Ring |
| Relief Valve Setting | 3/4 in SAE O-Ring |
| Displacement Shaft End (cu in/revolution) | 1.4 |