Denison T6 T7 Series hydraulic oil pump for engineering machinery
| Displacement Cover End (cu in/revolution): |
76.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Shaft Key: |
Left Hand (CCW) |
| Major Diameter [Min: |
3525VQ38A21-1AC20L |
| Spline Description: |
3 |
| Cover End Pressure [Max: |
Flange |
| Controlled Flow Rate: |
5/16 in |
| Relief Valve Setting: |
Standard Pilot |
| PDF |
|
Product Details
| Displacement Cover End (cu in/revolution) |
76.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Shaft Key |
Left Hand (CCW) |
| Major Diameter [Min |
3525VQ38A21-1AC20L |
| Spline Description |
3 |
| Cover End Pressure [Max |
Flange |
| Controlled Flow Rate |
5/16 in |
| Relief Valve Setting |
Standard Pilot |
| Pressure Port Size, Cover End |
1.25 in |
| Mounting |
Straight w/ Key |
| Seal Material |
3525VQ |
| Cover End RPM [Max |
2 1/2 in |
| Pilot Type |
Buna-N |
| Port Type |
2400 |
| Minor Diameter [Max |
N/A |
| Shaft Seal Type |
SAE C, 2 Bolt |
| Max. RPM [Max |
Single Shaft Seal |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Port Orientation - Cover End |
2500 |
| Pressure Port Size, Shaft End |
2400 |
| Shaft Dia. |
N/A |
| GPM @ 1,800 rpm, Cover End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
N/A |
| Shaft End Pressure [Max |
N/A |
| Minor Diameter |
N/A |
| Cover End Flow @ RPM |
N/A |
| Minor Diameter [Min |
N/A |
| Model No. |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Integral Valve Configuration |
3525VQ38A21-1AC20L |
| Port Orientation - Shaft End |
3000 |
| Rotation |
3000 |
| Pump Series |
31.5 |
| Shaft End Flow @ RPM |
57 |
| Shaft Type |
w/o Integral Valves |
| Mounting Flange |
Outlet 45° CW from Inlet |
| Major Diameter [Max |
Outlet Opposite Inlet |
| Weight |
1 in Flange |
| Shaft Length |
1 1/4 in Flange |
| Port Size |
4.12 |
| GPM @ 1,800 rpm, Shaft End |
7.42 |