RENOWELL BMR Series Hydraulic Vane Motor With Two Inner Check Valves
| Mounting: |
45.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Shaft Key: |
Right Hand (CW) |
| Max. RPM [Max: |
2520V21A2-1CA22R |
| Major Diameter [Min: |
2 1/2 |
| GPM @ 1,800 rpm, Shaft End: |
Flange |
| Cover End RPM [Max: |
1/4 in |
| Minor Diameter: |
Standard Pilot |
Product Details
| Mounting |
45.0 LB |
| Relief Valve Setting |
Flange Mount |
| Shaft Key |
Right Hand (CW) |
| Max. RPM [Max |
2520V21A2-1CA22R |
| Major Diameter [Min |
2 1/2 |
| GPM @ 1,800 rpm, Shaft End |
Flange |
| Cover End RPM [Max |
1/4 in |
| Minor Diameter |
Standard Pilot |
| Shaft Length |
0.875 in |
| Port Orientation - Shaft End |
Straight w/ Key |
| Cover End Flow @ RPM |
2520V |
| Weight |
2.32 in |
| Shaft End RPM [Max |
Buna-N |
| Pressure Port Size, Cover End |
1800 |
| Minor Diameter [Min |
N/A |
| Port Orientation - Cover End |
SAE B, 2 Bolt |
| Cover End Pressure [Max |
Single Shaft Seal |
| Controlled Flow Rate |
N/A |
| Shaft End Pressure [Max |
1800 |
| Pump Series |
1800 |
| Shaft End Flow @ RPM |
N/A |
| Manufacturer Part No. |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
| Shaft Dia. |
N/A |
| Port Size |
N/A |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Pilot Type |
N/A |
| GPM @ 1,800 rpm, Cover End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
2520V21A2-1CA22R |
| Spline Description |
3000 |
| Mounting Flange |
2500 |
| Rotation |
3 |
| Model No. |
31.5 |
| Shaft Type |
N/A |
| Displacement Cover End (cu in/revolution) |
Outlet 135° CCW from Inlet |
| Shaft Seal Type |
Outlet Inline w/Inlet |
| Port Type |
3/4 in Code 61 |
| Minor Diameter [Max |
1 in Code 61 |
| Seal Material |
0.43 |
| Integral Valve Configuration |
4.1 |