NSK UCP/UCF 208 D1 JAPAN Bearing
With over 10170 full-service B04311 Product Group stores, our NSK UCP/UCF 208 D1 JAPAN Bearing inventory is extensive and our 0.0 Inventory parts are priced right. FBV Hydraulic Pump Co., Ltd. Bearings Category within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | NSK |
| Model Number: | UCP/UCF 208 D1 |
| Controlled Flow Rate: | 30.0 LB |
| GPM @ 1,800 rpm, Cover End: | Flange Mount |
| Pilot Type: | Right Hand (CW) |
| Pump Series: | V2010-1F11B5B-1CC12 |
| Shaft Dia.: | 1 1/2 |
| Model No.: | Flange |
| Mounting Flange: | 3/16 in |
| Seal Material: | N/A |
Product Details
| Controlled Flow Rate | 30.0 LB |
| GPM @ 1,800 rpm, Cover End | Flange Mount |
| Pilot Type | Right Hand (CW) |
| Pump Series | V2010-1F11B5B-1CC12 |
| Shaft Dia. | 1 1/2 |
| Model No. | Flange |
| Mounting Flange | 3/16 in |
| Seal Material | N/A |
| Shaft Key | 0.875 in |
| Shaft Seal Type | Straight w/ Key |
| Shaft Length | V2010 |
| Max. RPM [Max | 2 5/16 in |
| Cover End Flow @ RPM | Buna-N |
| Integral Valve Configuration | 2500 |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Displacement Cover End (cu in/revolution) | SAE B, 2 Bolt |
| Weight | Single Shaft Seal |
| Major Diameter [Max | N/A |
| Relief Valve Setting | 3000 |
| Port Orientation - Cover End | 2500 |
| Cover End Pressure [Max | N/A |
| Port Size | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Major Diameter [Min | N/A |
| Pressure Port Size, Cover End | N/A |
| Pressure Port Size, Shaft End | N/A |
| Shaft Type | N/A |
| Shaft End Pressure [Max | N/A |
| Shaft End RPM [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | V2010-1F11B5B-1CC12 |
| Port Type | 2500 |
| Mounting | 2500 |
| Displacement Shaft End (cu in/revolution) | 7.5 |
| Rotation | 16.5 |
| Spline Description | N/A |
| Port Orientation - Shaft End | Outlet 45° CW from Inlet |
| Minor Diameter [Min | Outlet Inline w/Inlet |
| Minor Diameter | 1/2 in SAE O-Ring |
| Minor Diameter [Max | 3/4 in SAE O-Ring |
| Cover End RPM [Max | 1 |
| Manufacturer Part No. | 2.22 |
