Denison Hydraulic T6 T7 Denison Cartridge Kits
Major Diameter [Max: | 30.0 LB |
Pressure Port Size, Cover End: | Flange Mount |
Shaft Length: | Right Hand (CW) |
Port Size: | V2010-1F11S2S-11AA12 |
Shaft Dia.: | 1 1/2 |
Seal Material: | Flange |
Major Diameter [Min: | N/A |
Shaft Seal Type: | N/A |
PDF |
|
Product Details
Major Diameter [Max | 30.0 LB |
Pressure Port Size, Cover End | Flange Mount |
Shaft Length | Right Hand (CW) |
Port Size | V2010-1F11S2S-11AA12 |
Shaft Dia. | 1 1/2 |
Seal Material | Flange |
Major Diameter [Min | N/A |
Shaft Seal Type | N/A |
Minor Diameter [Max | 0.875 in |
Mounting | 13 Tooth Splined |
Pilot Type | V2010 |
Port Type | 1.3125 in |
Minor Diameter | Buna-N |
Controlled Flow Rate | 2500 |
Shaft Type | 0.728 in |
Relief Valve Setting | SAE B, 2 Bolt |
Rotation | Single Shaft Seal |
Minor Diameter [Min | 16/32 |
Shaft Key | 3000 |
Shaft End Pressure [Max | 2500 |
Model No. | N/A |
Displacement Shaft End (cu in/revolution) | 2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End | 0.873 in |
Cover End RPM [Max | 0.872 in |
Pressure Port Size, Shaft End | 0.7335 in |
Shaft End RPM [Max | 0.7225 in |
GPM @ 1,800 rpm, Cover End | N/A |
Weight | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Mounting Flange | V2010-1F11S2S-11AA12 |
Cover End Pressure [Max | 2500 |
Cover End Flow @ RPM | 2500 |
Spline Description | 3 |
Displacement Cover End (cu in/revolution) | 16.5 |
Shaft End Flow @ RPM | N/A |
Integral Valve Configuration | Outlet 135° CCW from Inlet |
Pump Series | Outlet Opposite Inlet |
Manufacturer Part No. | 1/2 in SAE O-Ring |
Max. RPM [Max | 3/4 in SAE O-Ring |
Port Orientation - Shaft End | 0.4 |
Port Orientation - Cover End | 2.22 |