Shimadzu SGP Gear Type Oil Pump Aluminum Material With Excellent Durability
| Minor Diameter [Min: | 18.0 LB |
| Minor Diameter: | Flange Mount |
| Displacement Cover End (cu in/revolution): | Right Hand (CW) |
| Shaft End RPM [Max: | 11 gal/min @ 1200 rpm |
| Cover End RPM [Max: | 1.25 |
| Major Diameter [Min: | NPT |
| Port Orientation - Shaft End: | N/A |
| Minor Diameter [Max: | 22 |
| PDF |
|
Product Details
| Minor Diameter [Min | 18.0 LB |
| Minor Diameter | Flange Mount |
| Displacement Cover End (cu in/revolution) | Right Hand (CW) |
| Shaft End RPM [Max | 11 gal/min @ 1200 rpm |
| Cover End RPM [Max | 1.25 |
| Major Diameter [Min | NPT |
| Port Orientation - Shaft End | N/A |
| Minor Diameter [Max | 22 |
| Port Orientation - Cover End | 11 gpm @ 1200 rpm |
| Pump Series | 0.73 in |
| Displacement Shaft End (cu in/revolution) | 11 Tooth Splined |
| Max. RPM [Max | 16.5 gpm @ 1800 rpm |
| Cover End Pressure [Max | V20 |
| Shaft Key | 1 1/4 in |
| GPM @ 1,800 rpm, Shaft End | Single |
| Model No. | 3/4 in NPT |
| Pilot Type | Buna-N |
| Pressure Port Size, Cover End | 2500 |
| Shaft End Pressure [Max | 2500 psi |
| Shaft End Flow @ RPM | 16 1/2 |
| Integral Valve Configuration | P |
| Mounting Flange | SAE A, 2 Bolt |
| GPM @ 1,800 rpm, Cover End | P |
| Cover End Flow @ RPM | 1 |
| Controlled Flow Rate | 90° CW from Inlet |
| Seal Material | 2.2 |
| Shaft Length | 8 gal/min |
| Major Diameter [Max | Flow Control & Relief |
| Rotation | 1750 psi |
| Port Type | 38D |
High Pressure Hydraulic Gear Oil Pump With Low Noise Performance
High Efficiency Hydraulic Gear Pump Japan Shimadzu Replacement SGP For Tractor
Blow Molding Machine Sumitomo Gear Pump With Low Pressure Pulsation
Original Sumitomo Internal Gear Pump QT42 QT52 QT62 Series CE Certificated
Shimadzu SGP Hydraulic Gear Pump Long Service Life For Forklift
Sumitomo QT52-63 Hydraulic Gear Pump With High Running Wear Resistance