High Pressure Hydraulic Gear Oil Pump With Low Noise Performance
Port Size: | 30.0 LB |
Pressure Port Size, Cover End: | Flange Mount |
Port Type: | Right Hand (CW) |
Minor Diameter [Min: | V2010-1F8S1S-11CC12 |
Major Diameter [Max: | 1 1/2 |
Shaft Type: | Flange |
Rotation: | N/A |
Mounting Flange: | N/A |
PDF |
|
Product Details
Port Size | 30.0 LB |
Pressure Port Size, Cover End | Flange Mount |
Port Type | Right Hand (CW) |
Minor Diameter [Min | V2010-1F8S1S-11CC12 |
Major Diameter [Max | 1 1/2 |
Shaft Type | Flange |
Rotation | N/A |
Mounting Flange | N/A |
Displacement Cover End (cu in/revolution) | 0.875 in |
Displacement Shaft End (cu in/revolution) | 13 Tooth Splined |
Minor Diameter | V2010 |
Shaft Dia. | 1 5/16 in |
Integral Valve Configuration | Buna-N |
Major Diameter [Min | 2800 |
Minor Diameter [Max | 0.728 in |
Port Orientation - Shaft End | SAE B, 2 Bolt |
Shaft Seal Type | Single Shaft Seal |
Pilot Type | 16/32 |
Spline Description | 3000 |
Cover End RPM [Max | 2800 |
Pressure Port Size, Shaft End | N/A |
GPM @ 1,800 rpm, Cover End | 1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm |
Port Orientation - Cover End | 0.873 in |
Mounting | 0.872 in |
Model No. | 0.7335 in |
Relief Valve Setting | 0.7225 in |
Max. RPM [Max | N/A |
Cover End Flow @ RPM | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End | V2010-1F8S1S-11CC12 |
Shaft Length | 2500 |
Pump Series | 2500 |
Cover End Pressure [Max | 1.5 |
Weight | 12 |
Shaft Key | N/A |
Shaft End Flow @ RPM | Outlet 45° CW from Inlet |
Seal Material | Outlet Inline w/Inlet |
Manufacturer Part No. | 1/2 in SAE O-Ring |
Shaft End RPM [Max | 3/4 in SAE O-Ring |
Controlled Flow Rate | 0.2 |
Shaft End Pressure [Max | 1.62 |