Shimadzu SGP Gear Type Oil Pump Aluminum Material With Excellent Durability
| Minor Diameter [Min: |
18.0 LB |
| Minor Diameter: |
Flange Mount |
| Displacement Cover End (cu in/revolution): |
Right Hand (CW) |
| Shaft End RPM [Max: |
11 gal/min @ 1200 rpm |
| Cover End RPM [Max: |
1.25 |
| Major Diameter [Min: |
NPT |
| Port Orientation - Shaft End: |
N/A |
| Minor Diameter [Max: |
22 |
| PDF |
|
Product Details
| Minor Diameter [Min |
18.0 LB |
| Minor Diameter |
Flange Mount |
| Displacement Cover End (cu in/revolution) |
Right Hand (CW) |
| Shaft End RPM [Max |
11 gal/min @ 1200 rpm |
| Cover End RPM [Max |
1.25 |
| Major Diameter [Min |
NPT |
| Port Orientation - Shaft End |
N/A |
| Minor Diameter [Max |
22 |
| Port Orientation - Cover End |
11 gpm @ 1200 rpm |
| Pump Series |
0.73 in |
| Displacement Shaft End (cu in/revolution) |
11 Tooth Splined |
| Max. RPM [Max |
16.5 gpm @ 1800 rpm |
| Cover End Pressure [Max |
V20 |
| Shaft Key |
1 1/4 in |
| GPM @ 1,800 rpm, Shaft End |
Single |
| Model No. |
3/4 in NPT |
| Pilot Type |
Buna-N |
| Pressure Port Size, Cover End |
2500 |
| Shaft End Pressure [Max |
2500 psi |
| Shaft End Flow @ RPM |
16 1/2 |
| Integral Valve Configuration |
P |
| Mounting Flange |
SAE A, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
P |
| Cover End Flow @ RPM |
1 |
| Controlled Flow Rate |
90° CW from Inlet |
| Seal Material |
2.2 |
| Shaft Length |
8 gal/min |
| Major Diameter [Max |
Flow Control & Relief |
| Rotation |
1750 psi |
| Port Type |
38D |