High Pressure Hydraulic Gear Oil Pump With Low Noise Performance
| Port Size: |
30.0 LB |
| Pressure Port Size, Cover End: |
Flange Mount |
| Port Type: |
Right Hand (CW) |
| Minor Diameter [Min: |
V2010-1F8S1S-11CC12 |
| Major Diameter [Max: |
1 1/2 |
| Shaft Type: |
Flange |
| Rotation: |
N/A |
| Mounting Flange: |
N/A |
| PDF |
|
Product Details
| Port Size |
30.0 LB |
| Pressure Port Size, Cover End |
Flange Mount |
| Port Type |
Right Hand (CW) |
| Minor Diameter [Min |
V2010-1F8S1S-11CC12 |
| Major Diameter [Max |
1 1/2 |
| Shaft Type |
Flange |
| Rotation |
N/A |
| Mounting Flange |
N/A |
| Displacement Cover End (cu in/revolution) |
0.875 in |
| Displacement Shaft End (cu in/revolution) |
13 Tooth Splined |
| Minor Diameter |
V2010 |
| Shaft Dia. |
1 5/16 in |
| Integral Valve Configuration |
Buna-N |
| Major Diameter [Min |
2800 |
| Minor Diameter [Max |
0.728 in |
| Port Orientation - Shaft End |
SAE B, 2 Bolt |
| Shaft Seal Type |
Single Shaft Seal |
| Pilot Type |
16/32 |
| Spline Description |
3000 |
| Cover End RPM [Max |
2800 |
| Pressure Port Size, Shaft End |
N/A |
| GPM @ 1,800 rpm, Cover End |
1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
0.873 in |
| Mounting |
0.872 in |
| Model No. |
0.7335 in |
| Relief Valve Setting |
0.7225 in |
| Max. RPM [Max |
N/A |
| Cover End Flow @ RPM |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
V2010-1F8S1S-11CC12 |
| Shaft Length |
2500 |
| Pump Series |
2500 |
| Cover End Pressure [Max |
1.5 |
| Weight |
12 |
| Shaft Key |
N/A |
| Shaft End Flow @ RPM |
Outlet 45° CW from Inlet |
| Seal Material |
Outlet Inline w/Inlet |
| Manufacturer Part No. |
1/2 in SAE O-Ring |
| Shaft End RPM [Max |
3/4 in SAE O-Ring |
| Controlled Flow Rate |
0.2 |
| Shaft End Pressure [Max |
1.62 |