Blow Molding Machine Sumitomo Gear Pump With Low Pressure Pulsation
| Port Orientation - Shaft End: |
75.0 LB |
| Displacement Shaft End (cu in/revolution): |
Flange Mount |
| Cover End Flow @ RPM: |
Left Hand (CCW) |
| Displacement Cover End (cu in/revolution): |
45VQ42A-86C20-LH |
| Major Diameter [Min: |
3 |
| Pressure Port Size, Cover End: |
Flange |
| Cover End RPM [Max: |
3/8 in |
| Integral Valve Configuration: |
20 |
| PDF |
|
Product Details
| Port Orientation - Shaft End |
75.0 LB |
| Displacement Shaft End (cu in/revolution) |
Flange Mount |
| Cover End Flow @ RPM |
Left Hand (CCW) |
| Displacement Cover End (cu in/revolution) |
45VQ42A-86C20-LH |
| Major Diameter [Min |
3 |
| Pressure Port Size, Cover End |
Flange |
| Cover End RPM [Max |
3/8 in |
| Integral Valve Configuration |
20 |
| Shaft Dia. |
42 gpm @ 1200 rpm |
| GPM @ 1,800 rpm, Shaft End |
86 |
| Seal Material |
1.5 in |
| Minor Diameter [Max |
Straight w/ Key |
| Shaft End RPM [Max |
63 / 1800 |
| Pump Series |
45VQ |
| Model No. |
2.9375 in |
| Major Diameter [Max |
None |
| Shaft Seal Type |
1 1/2 in Flange |
| Pressure Port Size, Shaft End |
Buna-N |
| Relief Valve Setting |
2200 |
| Mounting |
2500 psi |
| Pilot Type |
63 |
| Rotation |
A |
| Max. RPM [Max |
SAE C, 2 Bolt |
| Minor Diameter [Min |
Single Shaft Seal |
| Minor Diameter |
Inline w/Inlet |
| Cover End Pressure [Max |
45VQ42A-86C20-LH |
| Mounting Flange |
8.46 |
| Manufacturer Part No. |
w/o Integral Valves |